Videx 4833X-2/M 2 Button Camera & Speaker module for VK4K Matt finish

ADDITIONAL INFORMATION

The 4000 series audio modules are DDA complaint, equipped with call progress status LEDs: busy, call in progress, communication open and door open. Call reassurance tones to let the visitor know the call is in progress.

All modules contain a speaker and fly lead with microphone which easily fits into a 4000 series frame. Modules attach to the housing frames using a simple but strong clip in system. Speech levels can be adjusted using separate adjustments for both the speaker and microphone.

The modules are equipped with a CMOS colour camera with an auto iris lens, complete with 4 bright white illumination LED’s. The camera also has a 10° vertical and horizontal adjustment and contains a heating element to prevent the lexan window from misting up. The modules also have call reassurance tones and 4 call progress LED’s to advise the user when the system is busy, a call is in progress, when to speak and when the door is open.

• Built-in proximity access for up to 30 keyfobs (users).
• Impact Protection rating IK07 and ingress protection rating IP65.
• Microphone and speaker volume control POTs.
• Door open relay operating mode: dry relay contacts CO, NO and NC or capacitor discharge.

SPECIFICATION

TECHNICAL SPECIFICATIONS:

Camera High quality CMOS colour camera with auto iris lens and white light illumination LEDs (non-coax balanced video signal V1/V2)

Wide angle camera option Add /W to part number e.g. 4833X-1/W/S

Viewing angle: 80° vertical and 170° horizontal

Mounting height Between 130 - 160cm (approx.) for optimal camera viewing

Illumination Distance (LEDs) Up to 50cm max.

Name plate & illumination 1, back-lit blue 2, back-lit blue

Built-in proximity reader Yes: up to 30 users (max.), operating RFID frequency 125kHz (built-in proximity reader behind nameplate window for button 1)

Compatible fobs & cards Fobs: 955/T (blue), 955/B (black), 955/R (red), 955/Y (yellow), 955/G (green), card: 955/C

Call Progress LEDs Yes: 4xLEDs - Call, Busy, Speak and Door open

Module programming and adjustments Dip-switch SW: Unit ID (ID’s 1 - 4), conversation time and door open time.

Jumper J1: call reassurance tone high/low.

Jumper J2: relay operating mode dry contacts or capacitor discharge.

Jumpers J3: call button configuration

Jumper J4: back EMF protection (for door release relay)

Adjustment POTs Yes: microphone and speaker volume controls adjustment

Relay contacts 1 relay: CO, NO and NC / capacitor discharge (switched +pos through NO)

Relay voltage and amp rating Dry contact voltage: 24Vac/dc, 2A max. Capacitor discharge: 12Vac/dc, 1A max.

PTE input Yes: 1xPTE switched 0V input (push-to-make)

Working voltage +20Vdc input supplied from videophone 6256, 6358, 6458 or 6758 (via an 850K psu). Compatible PSU when powered locally 893N

Power consumption standby: 70mA / max. during operation: 250mA

Working temperature -20°/+60°C